Dkx-10/Dkx-19 High Security Lock Installation - Kaba Mas DKX Series Installation Instructions Manual

DKX-10/DKX-19 High Security Lock Installation

The DKX-19 base plate installation is identical to the DKX-10 base plate installation. Refer to the included S~G 2740B lock
installation instructions. The S~G 2740B installation instructions are included with the lock.
Warning: The electronics in the
grounding.
Figure 2
A. Place the 3.5" x 5 x
B. Feed the cables and outer tube through the
cover bracket (515034), oriented correctly as shown in above illustration, against the door.
C. Insert and slightly tighten two of the #10-32 machine screws (115052) (top and bottom, diagonal) to attach the
CDX-10, backing plate and cover bracket (515034) to the door.
Figure 3
Helpful Hint: If available, another inner tube inserted from the dial ring side, with the cables carefully fed through it, can be
very helpful as a guide in feeding the cables through the door face.
DKX-10 are susceptible to damage from Electro-Static Discharge (ESD). Ensure proper
1
/ " backing plate against the
8
0.5"
back of the DKX Series lock case assembly.
hole in the door while positioning the DKX-10, backing plate, and
27
27