Table of Contents
Advertisement
F.
Install the Outside Lever of dormakaba PowerPlex P2000.
Figure 9
A.
Assemble the lever on the outside housing, in the horizontal rest position
appropriate to the handing of the door as shown. Simply push the lever onto
the tube until it clicks in place. If more force is required to engage the handle,
use a rubber mallet. Test the setting of the handle by pulling on it.
B.
Use the
plastic washer to remove the lever play.
C.
The lever is reversible. If the handing is incorrect, insert a small pick or flat
screwdriver in the hole in the hub as shown. Gently pry back the spring clip
inside the hub and remove the handle.
5
/
" hex key, tighten the set screw while pushing the lever against the
32
14
14
Advertisement
Table of Contents
