Install Optional K-I-L or BEST Removable Core Override
and Outside Lever
Upon unpacking, the lock housing with
mechanical override should look like
the diagram below with:
•
The small indents (i) on the
cross of the override shaft (m)
in-line horizontally
•
The plastic washer (c)
on the drive tube
•
The lever catch (f) in the
out position
•
Cylinder (j) and 2 keys (n)
(included in the hardware bag)
•
Shaft override tool (o)
(included in the hardware bag)
A.
Push in the lever catch (f) firmly.
B.
Insert the cylinder (j) into
the lever handle (h).
Figure 10
15
15