Access Control List - Zte ZXHN H298N Maintenance Manual

4.2.4 Access Control List

Context
By default, the ACL
To configure the ACL, perform the following steps:
Steps
1. Choose [Network→ WLAN→ Access Control List].
2. Select a SSID from the Choose SSID drop-down list. Select Disabled, Block, or Permit, as
shown in Figure
Figure 30 Access Control List – I
Table 15 lists the ACL parameters.
Table 15 ACL Parameters
Parameter
Disabled
Block
Permit
3. In MAC Address, type the MAC address that you want to permit or block.
4. Click Add.
function for the ZXHN H298N is disabled.
30.
Description
Disable the ACL function.
Permit all the MAC addresses except the typed MAC address.
Block all the MAC addresses except the typed MAC address.
47