Fax - Zte ZXHN H298N Maintenance Manual

Parameter
Max Value
CLIP Mode
Echo Cancellation
Voice To Packet Gain
Packet To Voice Gain
3. Click Submit.
The VoIP advanced parameters are configured.

6.1.3 Fax

Context
To configure the VoIP
Steps
1. Choose [Application→ VoIP→ Fax].
2. Configure the VoIP fax parameters, as shown in
Description
Maximum jitter buffer value
Default: 20 ms
Calling line identification presentation mode
Select this check box to enable the echo cancellation.
Gain from the telepone to the network (tdm->net gain)
Gain from the network to the telephone (net->tdm gain)
fax, perform the following steps:
Figure 58.
80