Zte ZXHN H298N Maintenance Manual page 45

2. Select Shared Key from the Authentication Type drop-down list, as shown in
Figure 28 Shared Key
Table 13 lists the parameters for the Shared Key authentication mode.
Table 13 Parameters for the Shared Key Authentication Mode
Parameter
Choose SSID
Authentication
Type
WEP Encryption
WEP Encryption
Level
WEP Key Index
3. Click Submit.
WPA-PSK
To configure the WPA-PSK authentication mode, perform the following steps:
1. Choose [Network→ WLAN→ Security].
Description
Select a SSID as required.
Select Shared Key.
It is enabled by default.
The value can be 64bit or 128bit.
WEP provides four keys and they can be configured in WEP Key1 to WEP
Key4.
45
Figure 28.