Zte ZXHN H298N Maintenance Manual page 44

2. Select Open System from the Authentication Type drop-down list, as shown in
Figure 27 Open System
Table 12 lists the parameters for the Open System authentication mode.
Table 12 Parameters for the Open System Authentication Mode
Parameter
Choose SSID
Authentication Type
WEP Encryption
3. Click Submit.
Shared Key
To configure the Shared Key authentication mode, perform the following steps:
1. Choose [Network→ WLAN→ Security].
Description
Select a SSID as required.
Select Open System.
Select Disabled or Enabled.
44
Figure 27.