Zte ZXHN H298N Maintenance Manual page 33

Figure 20 WAN Connection
Table 6 describes the parameters for creating a new WAN connection.
Table 6 Parameters for Creating a New WAN Connection
Parameter
Connection Name
New Connection Name
Enable VLAN
Type
Enable DSCP
DSCP
MTU
Link type
Description
The default is Create WAN Connection. The connection name
is generated automatically.
Name the connection.
Enable the VLAN function.
Connection type
This function is used together with the
it as required.
The value ranges from 0 to 63.
Define the maximum transfer unit.
There are two link types:
PPP
�
IP
�
33
QoS function. Enable