Zte ZXHN H298N Maintenance Manual page 35

Figure 21 4in6 Tunnel Connection
Table 7 describes the parameters for creating a new 4in6 tunnel connection.
Table 7 Parameters for Creating a New 4in6 Tunnel Connection
Parameter
Tunnel Name
New Tunnel Name
Tunnel Type
WAN Connection
Interface IPv4 Address
Manual AFTR
Manual DNSV4
Description
Tunnel name. The new DS-Lite tunnel (Create Tunnel) or the
created DS-Lite tunnel is optional.
When Create Tunnel is selected for Tunnel Name, enter the
tunnel name in the New Tunnel Name text box.
At present, only DS-Lite is supported.
WAN connection related to DS-Lite tunnel, which must be IPv6
WAN connection.
IPv4 address of DS-Lite tunnel interface, which is reserved
for the local device. The range of Interface IPv4 address is
between 192.0.0.2 and 192.0.0.6.
When Manual AFTR is selected, the seventh parameter
appears, indicating that the tunnel is a manual tunnel. If Manual
AFTR is not selected, the seventh parameter does not appear,
indicating that the tunnel is an automatic tunnel.
When Manual DNSV4 is selected, the ninth parameter appears,
indicating that this parameter is entered manually. If Manual
DNSV4 is not selected, the ninth parameter does not appear,
indicating that this parameter is obtained automatically.
35