Zte ZXHN H298N Maintenance Manual page 63

Context
Policy routing is a routing rule. When it is configured, the packets are forwarded according to the
routing policy. The ZXHN H298N supports packet forwarding according to the DSCP, source or
destination IP address, protocol, source port number, or source
To configure policy routing, perform the following steps:
Steps
1. Choose [Network→ Routing(IPv4)→ Policy Routing].
2. Select an interface from the Destination Interface drop-down list, as shown in
Figure 44 Policy Routing
Table 23 lists the parameters for policy routing configuration.
Table 23 Parameters for Policy Routing Configuration
Parameter
Destination Interface
DSCP
Source IP/Mask
Destination IP
Destination Mask
Protocol
Description
Determined by the carrier
Differential Services Code Point, whose value ranges from 0 to
63.
Source IP address/mask.
Destination IP address
Destination mask of the network segment
Selected as required
63
MAC address.
Figure 44.