Zte ZXHN H298N Maintenance Manual page 39

Figure 24 IEEE 802.11b Only Configuration
Table 9 lists the IEEE 802.11b Only parameters.
Table 9 IEEE 802.11b Only Parameters
Parameter
Wireless RF Mode
Enable Isolation
Mode
Country/Region
Channel
Beacon Interval
Transmitting Power
QoS Type
RTS Threshold
Description
Select Enabled to enable the wireless RF function.
When you select this check box, the subscribers with different
SSIDs cannot visit each other.
Select the working mode according to the wireless network card
configuration.
Select the country or region.
The default is Auto.
Time interval for the wireless device to broadcast the SSID
Keep the default value.
Select the transmitting power as required.
Type of QoS
Specify the Request to Send threshold for a packet. When a
packet exceeds this value, the device sends the RTS value to the
destination point for negotiation. The default is 2347.
39