Zte ZXHN H298N Maintenance Manual page 15

Figure 2 USB Interface
Table 2 describes the ZXHN H298N interfaces and buttons.
Table 2 Interfaces and Buttons
Interface/Button
ON/OFF
WPS
WLAN
Reset
Power
LAN1–LAN4
Phone1 – Phone2
WAN
USB1
Description
Power button
Establish WLAN Push-Button connection.
WLAN button, used to switch on/off WLAN.
Reset button, used to restore the factory default settings when pressed for more
than 5 seconds in power-ON state.
Power jacket, 12 V DC.
RJ-45 LAN network ports, connected to the local network through the RJ-45
network cable.
RJ-11 port, connected to the phone through the telephone line.
Uplink Ethernet interface.
USB HOST port, used for the USB storage device connection.
15