Alg - Zte ZXHN H298N Maintenance Manual

Parameter
Mode
Service List
3. Click Add.
Service control is configured.
Postrequisite
You can also modify or delete the service control configuration, as listed in
Table 32 Service Control Operations
Button
Modify Remote Access Port

5.6 ALG

Context
The ALG functions allows the system to convert the private addresses to the public addresses in the
packets for the security purpose.
To configure the ALG setting, perform the following steps:
Steps
1. Choose [Security→ ALG].
2. Configure the service control parameters, as shown in
Description
The mode can be Discard or Permit.
The service list includes HTTP, FTP, TELNET and HTTPS.
Description
To modify the service control configuration
To delete the service control configuration
To modify the remote access port
75
Table
Figure 55.
32.