Table of Contents
Advertisement
Figure 8
shows the connection between the ZXHN H298N and the power supply.
�
Figure 8 Power Supply Connection
To supply power for the device, press the power button on the back of the device. When Internet
indicator of the ZXHN H298N indicators is ON, you can access the Internet and use the phone.
2.2 Configuring TCP/IP
Perform this procedure to configure TCP/IP.
Context
To ensure that the device can access the Internet successfully, configure the computer address in the
same network segment as the ZXHN H298N address.
The default network settings for the ZXHN H298N are as follows:
IP
address: 192.168.1.1
�
Subnet mask: 255.255.255.0
�
Default gateway: 192.168.1.1
�
To configure TCP/IP, perform the following steps:
Steps
1. Configure TCP/IP.
i.
In Local Area Connection Properties, select Internet Protocol (TCP/IP).
ii.
Click Properties to open the Internet Protocol (TCP/IP) Properties dialog box.
iii.
In the Internet Protocol (TCP/IP) Properties dialog box, select Use the following IP
address. Set IP address, Subnet mask, and Default gateway. Set the computer IP
22
- Quick Links:
- Logging in to the Device
Hide quick links:
Advertisement
Table of Contents
