4In6 Tunnel Connection - Zte ZXHN H298N Maintenance Manual

Parameter
PPPoE pass-through
Username/Password
Authentication Type
Connection Trigger
IP version
PPP TransType
Enable NAT
3. Click Create.

4.1.2 4in6 Tunnel Connection

Perform this procedure to configure 4in6 tunnel connection.
Steps
1. Choose [Network→ WAN→ 4in6 Tunnel Connection].
2. Select Create Tunnel from the Tunnel Name drop-down list, and configure other parameters, as
shown in Figure
Description
Enable the PPPoE pass-t;hrough function.
PPPoE username and password
They are provided by the ISP.
The type includes Auto, PAP, and CHAP. By default, it is Auto.
There are three connection trigger modes:
�
�
�
The IP version includes:
�
�
�
PPPoE
When multiple computers in a
to access the Internet. NAT is used to translate the private
network address to the public network address of the WAN port.
21.
Always On: When the device is started or gets offline, the
system triggers PPPoE dialing automatically.
On Demand: The system triggers PPPoE dialing on de-
mand.
Manual: The system triggers PPPoE dialing manually.
IPv4
IPv6
IPv4/v6
34
LAN share one IP address