Steps
1. Choose [Application→ Port Forwarding].
2. Configure the port forwarding parameters, as shown in
Figure 68 Port Forwarding
Table 42
lists the port forwarding parameters.
Table 42 Port Forwarding Parameters
Parameter
Enable
Name
Protocol
WAN
Host Start
Host End IP Address
WAN Connection
WAN Start Port/WAN End Port
IP
Address/WAN
Figure
Description
Select the check box to enable port forwarding function.
Virtual host name, which cannot be null
Protocol of the permitted packet
Default:
TCP
IP address segment of the WAN-side host
WAN connection
Port number range of the WAN-side host
94
68.