Igmp; Wan Connection - Zte ZXHN H298N Maintenance Manual

Parameter
Secondary NTP Server
Address
Poll Interval
Enable Daylight Saving Time
DSCP
3. Click Submit.
SNTP is configured.

6.10 IGMP

6.10.1 WAN Connection

Prerequisite
Before this operation, make sure that the WAN connection configuration is complete.
Steps
1. Choose [Application→IGMP→ WAN Connection].
2. Select a WAN connection type in the WAN Connection drop-down list, as shown in
Description
IP address of the secondary NTP server
The time interval that the ZXHN H298N device sends
synchronization packets to the NTP server.
Unit: second
Select this check box to enable the daylight saving time.
Range: 0–63
108
Figure 77.