Configure The Fax - Zte ZXHN H3600 Maintenance Management Manual

ZXHN H3600 Maintenance Management Guide
Table 7-5 Description of the Media Parameters
Parameter
G722, G711U, G711A, G729,
G726, G723
VAD
Codec Priority
3. Click Apply button to apply the changes.

7.6 Configure the Fax

The ZXHN H3600 supports the T30 and T38-based fax feature. By default, the T38 pro-
tocol is used.
Steps
1. On the main page of the ZXHN H3600 device, select VoIP > Fax. The Fax page is
displayed, see
Figure 7-7 Fax Page
2. Set the parameters. For a description of the parameters, refer to
Table 7-6 Parameter Descriptions for the Fax
Parameter
Enable T38 Protocol
3. Click Apply button to apply the changes
78
Description
Select a codec, which must be the same as that configured in the
SoftSwitch system.
Select a codec, which must be the same as that configured in the
SoftSwitch system.
You can modify priority through this parameter. A lower number
indicates a higher priority.
Figure 7-7.
Description
Whether to enable the T38 protocol.
If the Off button is selected, the T30 protocol is used.
SJ-20201203151144-003 | 2021-06-16(R1.0)
Table 7-6.