ZXHN H268A Maintenance Management Manual(EXETEL)
3. Click Apply.
– End of Steps –
6.6 Configure the Media
This procedure describes how to configure the media codec type.
Steps
1. Select Application > VoIP > Media. The Media page is displayed, see
Figure 6-7 Media Page
2. Configure the media parameters. For a description of the parameters, refer to
6-5.
Table 6-5 Media Parameter Descriptions
Parameter
G722 VAD,G711U VAD,
G711A VAD, G729 VAD,
G726 VAD, G723 VAD,
Codec Priority
3. Click Apply.
– End of Steps –
6.7 Configure the Fax
The ZXHN H268A supports the T30 and T38-based fax feature. By default, the T38
protocol is used.
SJ-20150916162339-007|2017-02-16 (R1.0)
Description
Select a codec, which must be the same as that configured in
the SS system.
You can modify priority through this parameter. A lower number
indicates a higher priority.
6-6
Figure
ZTE Proprietary and Confidential
6-7.
Table