5G NR bands
5G NR
5G NR HPUE bands
(n41/n77/n78/n79)
NOTE
1)
For 5G NR TDD bands,
5.3. GNSS Antenna Interface
The following table shows frequency specification of GNSS antenna connector.
5.3.1. General Description
The module includes a fully integrated global navigation satellite system solution (GPS, GLONASS,
BeiDou/Compass, and Galileo).
The module supports standard NMEA-0183 protocol, and outputs NMEA sentences at 1 Hz data update
rate via USB interface by default.
By default, the module GNSS engine is switched off. It has to be switched on via AT command. For more
details about GNSS engine technology and configurations, see document [5].
5.3.2. GNSS Frequency
Table 40: GNSS Frequency
Type
GPS/Galileo/QZSS
Galileo
QZSS
GLONASS
BeiDou
RM510Q-GL_Hardware_Design
23 dBm ± 2 dB (Class 3)
26 dBm +2/-3 dB (Class 2)
the normative reference for this requirement is TS 38.101-1 [2] clause 6.3.1
Frequency
1575.42 ± 1.023 (L1)
1575.42 ± 2.046 (E1)
1575.42 (L1)
1597.5–1605.8
1561.098 ± 2.046
5G Module Series
RM510Q-GL Hardware Design
< -40 dBm
(BW: 5–20 MHz)
< -40 dBm
(BW: 5–20 MHz)
Unit
MHz
MHz
MHz
MHz
MHz
1)
1)
64 / 88