Installing Max-On Rx3I Software; System Requirements; To Install Max-On Rx3I Software; Uninstalling Max-On Rx3I Software - Emerson PACSystems RX3i User Manual

User Manual
GFK-2409B
1.1

Installing Max-ON RX3i Software

1.1.1

System Requirements

Max-ON RX3i Software may be installed on a PC that has the minimum requirements shown
below:
•
•
•
•
•
Note
1.1.2

To Install Max-ON RX3i Software

1. Make sure that you have installed PAC Machine Edition release 5.8 SIM 1 or later.
2. It is recommended that you close all applications including virus checking, Internet
3. Put the Max-ON RX3i Software CD in CD-ROM Drive.
4. Select the CD drive from Windows Explorer.
5. Double click Setup.exe.
6. Follow the user prompts to complete the installation.
1.1.3

Uninstalling Max-ON RX3i Software

Max-ON RX3i Software can be uninstalled only from the computer upon which it is installed.
It cannot be uninstalled over a network. You can uninstall Max-ON RX3i Software from the
Add/Remove Programs option on the Windows Control Panel or from the Windows Start
Menu.
If the computer has other Emerson software products installed, Max-ON RX3i Software can
be uninstalled without removing any files needed by those applications. To uninstall Max-
ON RX3i Software, do the following:
1. Choose Uninstall from the Start Menu or the Control Panel.
2. A dialog box appears asking if you are sure you want to uninstall.
3. Confirm the Uninstall.
Introduction
1 GHz Pentium class processor
256 MB RAM or more
Windows XP Professional Service Pack 2, Windows 2000 Professional Service
Pack 4
50 MB of free disk space
Max-ON RX3i Software requires Logic Developer PLC Professional Edition Release 5.80 LD PLC
SIM 1 or later.
This is required to configure and program the Max-ON RX3i CPU.
Explorer, and HMI software that might be running in the background. You may
need to check the task manager to determine if other applications are running. As
a further precaution, it is also recommended that you re-boot the PC to make sure
components that Max-ON RX3i Configuration Utility needs to update are not
running during the installation process.
Chapter 1
Oct 2019
2