Pc Configuration Software Rosemount Radar Master; Installing The Rrm Software - Emerson Rosemount 5400 Series Reference Manual

Reference Manual
00809-0100-4026, Rev AA
November 2003
PC CONFIGURATION
SOFTWARE
ROSEMOUNT RADAR
MASTER
Installing the RRM
software
The Rosemount Radar Master (RRM) is a user-friendly software tool that
allows you to configure the 5400 transmitter. You can choose either of the
following two methods to configure a 5400 transmitter:
• Start the Wizard for a guided installation if you are un-familiar with the
5400 transmitter.
• Use the Setup function if you are already familiar with the configuration
process or if you just want to change the current settings.
To install the Rosemount Radar Master:
1. Insert the installation CD into your CD-ROM drive.
2. If the installation program is not automatically started, from the windows
Start Bar choose Run and type D:\Setup.exe where D is the CD-ROM
drive.
3. Follow the instructions on the screen.
4. For optimum performance set COM Port Buffers to 1.
To start the RRM:
1. From the Start menu click Programs>Saab Rosemount>Rosemount
Radar Master.
2. In the RRM Status Bar check that RRM communicates with the
transmitter. If communication does not work check that the correct COM
port is connected on the computer and that the COM port is properly
configured, see "Specifying the COM Port" on page 4-4.
RRM communicates
with the devices.
Rosemount 5400 Series
Preliminary copy
4-3