Emerson PACSystems RX3i User Manual page 82

User Manual
GFK-2409B
Figure 83
Configure I/O Devices on the Primary Bus for PLC A
Use the Bus I/O configuration summary from the Max-ON RX3i Configuration Utility as a
guide for configuring the Genius devices that reside on the Genius bus.
Add Genius devices to the GBC's configuration and configure the Genius device parameters
to match. A sample is shown below.
Figure 84
Repeat this process for each Genius device in the Max-ON RX3i configuration.
Figure 85
Repeat the above process until there are no more bus controllers to be configured.
Configuring the Hot Standby Redundancy CPUs
Chapter 6
Oct 2019
78