Emerson PACSystems RX3i User Manual page 10

User Manual
GFK-2409B
•
You navigate to the Max-ON RX3i Configuration Utility by following these steps:
1. Select the target PLC_COMMON_CODE.
2. Expand the tree structure so that the Supplemental Files folder named Documentation
Files is visible
Figure 7:
3. Double-click on Documentation Files. This will launch Windows Explorer for this
4.
Figure 8:
5. Double-click on the Max-ON RX3i Configuration file named config.mx3. This
6. You may now examine and edit the parameters of the Max-ON RX3i redundant
Introduction
PLC_COMMON_CODE – This target contains the core logic for the Max-ON RX3i
redundancy application. You must add your application logic starting in the rung
that follows the call to the core Max-ON RX3i logic (hbr_000). The logic from this
target will be downloaded to both PLC A and PLC B. Note that the download consists
of the PLC Logic only, the Hardware Configuration option must be unchecked.
directory.
Click on the Max-ON Project directory to display its contents. The Explorer window
will be like what is shown below.
launches the Max-ON RX3i Configuration Utility.
system.
Chapter 1
Oct 2019
6