Emerson PACSystems RX3i User Manual page 42

User Manual
GFK-2409B
Figure 48:
8. Edit the device properties for both the Primary and Secondary busses.
9. Click Apply and Ok to complete the changes or Cancel to leave without making any
Editing Genius, I/O Devices
1. To edit a Genius device's parameters, select the Genius I/O item in the Project tree
2. Select a Genius device by clicking on the gray button to the left of the SBA number.
3. Select the Bus Devices > Properties... menu item. The Edit Genius Device dialog is
Figure 49:
The Max-ON RX3i Configuration Utility
changes.
for a specific Genius Bus.
A " a " will be placed on the button to indicate it is selection.
displayed.
Chapter 4
Oct 2019
38