Emerson PACSystems RX3i User Manual page 134

User Manual
GFK-2409B
Set the Producer ID
Go to the Navigator window and click on Ethernet Global Data so that you may edit the
properties.
Go to the Inspector window and edit Local Producer ID so that the IP address corresponds
to the IP address that was set for the Primary LAN Ethernet module in PLC B.
Figure 141
Primary LAN EGD
Consumed Exchange
In the Navigator window, expand Ethernet Global Data to reveal the Consumed and
Produced exchanges.
Figure 142
Right-click on Consumed Exchanges. The following pop-up menu will be displayed.
Updating an Existing Application
Appendix D
Oct 2019
130