Roclink 800 Configuration Software - Emerson FloBoss 107 Instruction Manual

1.5

ROCLINK 800 Configuration Software

Issued Feb-07
Communications programs.
Special applications.
You can transfer licenses for User C programs to the FB107 using
ROCLINK 800's License Key Administrator function (Utilities >
License Key Administrator).
ROCLINK 800 Configuration software is a Microsoft
based program that runs on a PC and enables you to monitor, configure,
and calibrate the FB107.
Many of the configuration screens, such as meters, I/O, and PIDs, are
available while ROCLINK 800 is off-line. This enables you to configure
the system while either on-line or off-line with the FB107.
The Local Operator Interface (LOI local port) provides a direct link
between the FB107 and a PC. The LOI port uses a DB9 connector with
standard EIA-232 (RS-232C) pinout. With a personal computer running
ROCLINK 800, you can locally configure the FB107, extract data, and
monitor its operation.
Remote configuration is possible from a host computer using a serial
communications line. You can duplicate configurations and save them
to a disk. In addition to creating a backup, this feature is useful when
you are similarly configuring multiple FB107s for the first time, or
when you need to make configuration changes off-line. Once you create
a backup configuration file, you can load it into an FB107 with the
Download function (File > Download).
Access to the FB107 is restricted to authorized users with correct user
ID and password.
You can build custom displays for the FB107 in ROCLINK 800 that
combines both graphic and dynamic data elements. The displays can
monitor the operation of the FB107 either locally or remotely.
You can archive historical values for any numeric parameter in the
FB107. For each parameter configured for historical archiving, the
system keeps time-stamped minute, periodic, and daily data values as
well as yesterday's and today's daily minimum and maximum values.
You can collect history values from the FB107 using ROCLINK 800 or
another third-party host system. You can view history directly from the
FB107 or from a previously saved disk file. For each history segment,
you can configure the number of periodic history values archived, the
frequency of archiving the periodic values, the number of daily values
archived, and the contract hour.
ROCLINK 800 can create an EFM (Electronic Flow Measurement)
report file that contains all configuration, alarms, events, periodic and
General Information
FloBoss 107 Instruction Manual
®
Windows
®
-
1-19