Meterlink Software; Design Of Rosemount ™ 3410 Series Meter - Emerson Rosemount 3414 Installation Manual

Installation manual
00825-0600-3104
1.4

MeterLink software

MeterLink software has robust features for setting communications parameters,
configuring your meter, collecting logs and reports and monitoring the meter
health and alarm statuses. MeterLink may be downloaded at no charge from:
www.emerson.com/meterlink.
Figure 1-1: MeterLink download and registration
Refer to MeterLink Software for Gas and Liquid Ultrasonic Meters Quick Start Manual
(00809-0100-7630) for installation instructions and setup for initial
communications. You may download the manual from the MeterLink web page:
www.emerson.com/meterlink.
1.5 Design of Rosemount
Rosemount 3410 Series Gas Ultrasonic Flow Meters are designed to accurately
measure products in applications where reliable performance is critical, by
measuring the difference in signal transit time with and against the flow across
one or more measurement path(s). A signal transmitted in the flow direction
travels faster than one transmitted against the flow direction. Each measurement
path is defined by a transducer pair in which each transducer alternately acts as
transmitter and receiver. The meter uses transit time measurements and
transducer location information to calculate the mean velocity.
Computer simulations of various velocity profiles demonstrate that multiple
measurement paths provide an optimum solution for measuring asymmetric
flow.
Rosemount 3414 Gas Ultrasonic Flow meters utilize four cross-bore, parallel-plane
measurement paths that offer a high degree of accuracy, repeatability, bi-
directional measurement and superior low-flow capabilities without the
compromises associated with conventional technologies. These features make the
Rosemount 3414 the best choice for custody transfer applications.
Installation manual
3410 series meter
™
Introduction
January 2023
9