Emerson PACSystems RX3i User Manual page 64

User Manual
GFK-2409B
Figure 65
:
In this example, the PID parameters begin at PID_P01 (%R01001). For PID loop 01, there
must be a synchronized data group configured that assures that registers %R01001 through
%R01040 are transferred. You must include the registers associated with other PID function
blocks as well.
User-Defined Alarms
The user may post self-defined faults from within the application by performing the
following steps.
Note:
In Max-ON RX3i Configuration Utility
1. Select the User Alarms item in the Max-ON RX3i Configuration Utility Project tree.
Programming Considerations
User defined Alarms are not available in this version the Max-ON RX3i VIEW Diagnostic Tool.
Chapter 5
Oct 2019
60