Huawei UPS5000-E User Manual page 89

UPS5000-E-(50 kVA–300 kVA)
User Manual (50 kVA Power Modules)
Step 2 Remove the cable covers from the top of the cabinet.
Figure 3-31 Removing the cable covers from the top of the cabinet
Step 3 Connect ground cables, as shown in
● Ensure that all UPS upstream input switches are turned off before connecting
● Determine the actual number of ground cables based on
● Prepare the OT terminals onsite to ensure that the length of the copper wire is
Issue 15 (2022-01-30)
NO TICE
cables.
requirements. The following figure is for reference only.
the same as that of the part of the OT terminal that covers the conductor.
Copyright © Huawei Technologies Co., Ltd.
Figure 3-32.
3 Installation
Table 3-2 and the site
80