Alpha ESS Storion-SMILE5 Installation, Operation & Maintenance Manual page 39

Step 1: Activate the meter display by pressing
any key. Then click the "Set" button.
Step 3: Enter the password "0001" and confirm
the entry by pressing the Enter key.
Step 5: Set the communication address and communication baud rate in the communication setting
interface. When the meter is used as Grid meter (DC, AC/Hybrid system), the address is set to "005".
When it is used as the PV meter (AC/Hybrid system), the address is set to "006". The baud rate is set
to 9600.
___________________________________________________________________
Installation
Step 2: Use the arrow keys to select the "SETUP"
menu item and confirm your selection with the
Enter key.
Step 4: Select the menu item "Comm" in the
settings menu to change to the communication
settings.
Alpha ESS Co., Ltd.
Your Smart Energy
Page 37