Alpha ESS Storion-SMILE5 Installation, Operation & Maintenance Manual page 11

electrolyte may be leaked or toxic gases formed.

Do not install the system in any environment of temperature below -10° C or over 50° C and
in which humidity is over 85%.

Do not touch the system with wet hands.

Do not put any heavy objects on top of the system.

Do not damage the system with sharp objects.

Do not install or operate the system in potentially explosive atmospheres or areas of high
humidity.

Do not mount the inverter and the battery pack in areas containing highly flammable
materials or gases.

If moisture has penetrated the system (e.g. due to a damaged enclosure), do not install or
operate the system.

Do not move the system when it is already connected with battery modules.

Secure the system to prevent tipping with restraining straps in your vehicle.

The transportation of AlphaESS Storion-SMILE5 must be made by the manufacturer or an
instructed personal. These instructions shall be recorded and repeated.

A certified ABC fire extinguisher with minimum capacity of 2kg must be carried along when
transporting.

It is totally prohibited to smoke in the vehicle as well as close to the vehicle when loading
and unloading.

For the exchange of a battery module, please request for new hazardous goods packaging
if needed, pack it and let it be picked up by the suppliers.

In case of contact with electrolyte, rinse the affected areas immediately with water and
consult a doctor without delay.
CAUTION:
Risk of injury through lifting or dropping the system.
The inverter and battery are heavy. There is risk of injury if the inverter or battery is lifted incorrectly
or dropped during transport or when being attached to or removed from the wall.

Lifting and transporting the inverter and battery must be carried out by more than 2 people.
___________________________________________________________________
Introduction
Alpha ESS Co., Ltd.
Your Smart Energy
Page 9