Figure 107. Removing the M.2 BOSS card from the M.2 BOSS riser
Next steps
If applicable,
install an card into the M.2 BOSS
riser.
Installing the M2 BOSS card into the M.2 BOSS riser
Prerequisites
1. Follow the safety guidelines listed in the
Safety
instructions.
2. Follow the procedure listed in
Before working inside your system
.
3.
Removing the M.2 BOSS
riser.
Steps
1. Align and insert the M.2 BOSS card connector with the connectors on the M.2 BOSS riser.
2. Press the blue touch point on the M.2 BOSS card until it is firmly seated.
140
Installing and removing system components