Installing The M2 Boss Card Into The M.2 Boss Riser - Dell X95FF Installation And Service Manual

Figure 78. Removing the M.2 BOSS card from the M.2 BOSS riser
Next steps
If applicable, install a BOSS card into the M.2 BOSS

Installing the M2 BOSS card into the M.2 BOSS riser

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
3. Removing the M.2 BOSS
Steps
1. Align and insert the M.2 BOSS card connector with the connectors on the M.2 BOSS riser.
2. Press the blue touch point on the M.2 BOSS card until it is firmly seated.
Figure 79. Installing the M2 BOSS card into the M.2 BOSS riser
78 Installing and removing system components
riser.
Safety instructions.
Before working inside your
riser.
system.