3.43.3 Firmware Update Via Network
To update the machine via network, set the items.
1. Open the network service screen. (See page 3-122.)
2. Click [Firmware Update via Network].
3. Enter the necessary information.
4. Click [Update] to start updating the machine.
5. When updating has finished, the machine restarts automatically.
Check the ROM version to see the update has succeeded. The ROM version is displayed at "Machine
Status" on the Message Board.
3.43.4 Firmware Update
1. Open the network service screen. (See page 3-122.)
2. Click [Firmware Update].
3. Click [Browse] to browse the location where the firmware is located.
eg.
Machine: KM25e_USA_A0A0A0.bin
4. Click [Update].
5. When updating is finished, the machine restarts from itself.
6. Check the ROM version to see the update has succeeded. The ROM version is displayed at "Machine
Status" on the Message Board.
3-127