Konica Minolta BIZHUB 25E Field Engineering Manual page 218

Scan to folder, Scan to Printer, and DocIndex transmission result
Error
Description
Code
10002 <Stop> was pressed during
scanning with non-batch
scan function
9999 System error
1001 Connection error
1003
1008
1013
1016
1017
1032
Check message
— Wait for a while, and try to
send again
System error occurred Wait for a while, and try to
send again
Not able to be connect • Check that host name on
the network.
• Check DNS server address,
DNS suffix, and WINS server
address are set correct at
"TCP/IP settings".
• Check that the destination
computer name is registered
on DNS server.
• Check that the destination
computer registers WINS
setting correctly.
Countermeasure
STATUS_NOT_IMPLEMENTED
0xC0000002
STATUS_INVALID_DEVICE_REQUEST
0xC0000010
STATUS_ILLEGAL_FUNCTION
0xC00000AF
STATUS_OBJECT_PATH_INVALID
0xC0000039
STATUS_OBJECT_PATH_NOT_FOUND
0xC000003A
STATUS_OBJECT_PATH_SYNTAX_BAD
0xC000003B
STATUS_DFS_EXIT_PATH_FOUND
0xC000009B
STATUS_REDIRECTOR_NOT_STARTED
0xC00000FB
STATUS_BAD_NETWORK_PATH
0xc00000BE
STATUS_SECTION_TOO_BIG
0xC0000040
STATUS_TOO_MANY_PAGING_FILES
0xC0000097
STATUS_INSUFF_SERVER_RESOURCES
0xC0000205
STATUS_NO_MEMORY
0xc0000017
STATUS_DATA_ERROR
0xC000009C
STATUS_DIRECTORY_NOT_EMPTY
0xC0000101
STATUS_NOT_SAME_DEVICE
0xC00000D4
STATUS_SHARING_VIOLATION
0xC0000043
4-12
NTSTATUS values
—
Invalid function. The server did
not recognize or could not perform
a system call generated by the
server, e.g. set the DIRECTORY
attribute on a data file, invalid seek
mode.
Directory invalid. A directory com-
ponent in a path name could not
be found.
Insufficient server memory to per-
form the requested function
Invalid data (generated only by
IOCTL calls within the server)
A Delete Directory request at-
tempted remove the server's cur-
rent directory
Not the same device (e.g. a cross
volume rename was attempted)
The sharing mode specified for
Open conflicts with existing FIDs
on the file.
Details