Pcb Psu - Konica Minolta BIZHUB 25E Field Engineering Manual

PCB PSU

CAUTION
• When you dsiassemble this unit, first press the power button on the pannel after you have remoed the
power cable.
• Do not touch the components mounded on the PSU PCB and the heat sinks to avoid the risk of electri-
cal shock.
1. Remove the power cord [3].
2. Remove two screws [4].
3. Open the Cover front [5].
4. Remove the upper part of the Cover left [7] while releasing the hook [6] and remove the Cover left [7].
5. Remove two screws [10].
6. Pull out the PCB PSU [11] a little.
7. Disconnect two connectors [12], then remove the PCB PSU [11].
Important
When assembling the Cover left, insert in the lower part hook first.
5-37