Configuring Wireless Settings; Configuring The Extended Security Settings; Configuring The Print Server Settings; Configuring Services - Avery Dennison MONARCH 9493 System Administrator Manual

C o n f i g u r i n g W i r e l e s s S e t t i n g s
Use this tab to configure the wireless settings.
1. Specify the Basic Wireless settings including Mode, Radio, SSID, Channel, Speed, Access
Point Density, International Roaming, Dynamic Frequency, Country and RTS Threshold.
Specify the Wireless Security and enter any WEP Keys, Wireless Authentication, or
2.
Passwords as required.
C o n f i g u r i n g t h e E x t e n d e d S e c u r i t y S e t t i n g s
Use this tab to configure the extended security settings.
Specify the Certificate settings, including the Root Key, Common Names, Organization
Names, and Passphrases as required.
C o n f i g u r i n g t h e P r i n t S e r v e r S e t t i n g s
Use this tab to configure the server settings.
1. Specify the basic Print Server settings including the System Name, Location, SNMP
Community Name, and Power Level as required.
Enable Restart the Network Interface to reinitialize the print server with the selected
2.
settings at the end of the script.
3. Enable Restore Default Configuration to restore all print server defaults before applying
any other configuration settings.
4. Enter the Passwords for Read and Write Access.
5. Enter the Firmware Update File and TFTP Server IP Address if necessary.
C o n f i g u r i n g S e r v i c e s
Use this tab to configure the services for TCP/IP and NetWare.
1. Enter the Service Settings including the Filter, Priority, and TCP Port.
Select the Protocol and NetWare Queue Server or Remote Server.
2.
3. Specify the Control Strings for the Beginning and End of Jobs.
Using the Sierra Sport Configurator 5-3