Printing A Test Page; Using The Console; Updating Firmware - Avery Dennison MONARCH 9493 System Administrator Manual

Assign the necessary security settings for your network. See "Basic Security Configurations"
3.
for more information.
Click Submit.
4.
5. Click the reset link at the bottom of the screen. The Reset Server screen appears.
6. Click Submit and wait five seconds for the print server to reset.
Even though you submitted your changes, they do not take effect until you reset the print
server.
You must re-enter your access password to make any further changes to the printer
settings.
P r i n t i n g a T e s t P a g e
You can use the Web browser to send a test page to the printer.
1. From the side menu, click Admin. The Web Admin Configuration screen appears.
2. Click Print Test Page.
Three wireless network information labels print. See Chapter 2, "Configuring the 802.11b/g
3.
and IP Settings" for more information on test labels.
U s i n g t h e C o n s o l e
The Custom Commands menu allows you to enter Telnet console commands.
1. From the side menu, click Admin. The Web Admin Configuration screen appears.
2. Click Console.
Enter a Telnet console command. See Chapter 6, "Telnet Console Commands," for more
3.
information.
4. Click Enter. The results from a Telnet command appear.
U p d a t i n g F i r m w a r e
You can update the printer's firmware from your Web browser by connecting to a TFTP server,
or browsing to the update file on your computer.
1. From the side menu, click Admin. The Web Admin Configuration screen appears.
4-14 System Administrator's Guide