Using The Network Menu; Checking The Status; Configuring The Printer - Avery Dennison MONARCH 9493 System Administrator Manual

Press A under T to enter the main menu.
3.
4. Tools is highlighted. Press e to select Tools.
Press A under the corresponding number to enter the following default password:
5.
1, 1, 1, 3, 1.
6. Press D until Setup is highlighted. Press e to select Setup.
Press D until Network is highlighted. Press e to select Network.
7.
U s i n g t h e N e t w o r k M e n u
The Network menu allows you to check the printer's status, configure the network settings, print
the settings, and reset the radio.
To exit, press E until you return to the Pause screen.

Checking the Status

This option displays the status of the network.
From the Network menu, select Status.
1.
You see the printer model, firmware version, and bootloader version.
2. Press E to move through the next four screens of information.
You see the radio type and MAC address, local IP address, SSID, protocol, network
mode, status, and connection speed.
Press E again to return to the Network menu.
3.

Configuring the Printer

The Configure menu allows you to set the printer's IP address, subnet mask, gateway, power
mode, port, SSID, encryption type, keys, and escape character. You can also enable or disable
Ad-Hoc mode.
From the Network menu, select Configure.
To exit, press E until you return to the Pause screen.
2-10 System Administrator's Guide