Avery Dennison MONARCH 9493 System Administrator Manual page 14

Use the A buttons as shown in the following table:
E
Press A to
Saves the setting
When the setting you want is displayed, press E to save the setting. You return to the
3.
Configure menu.
Setting the Subnet Mask
This option sets the printer's subnet mask.
1. From the Configure menu, select Subnet Mask.
Subnet Mask
255.255.000.000
E R
Use A as shown in the following table:
E
Press A to
Saves the setting
When the setting you want is displayed, press E to save the setting. You return to the
2.
Configure menu.
Setting the Gateway
This option sets the printer's router (gateway) address.
1. From the Configure menu, select Gateway.
Gateway
000.000.000.000
E R
Use A as shown in the following table:
E
Press A to
Saves the setting
When the setting you want is displayed, press E to save the setting. You return to the
2.
Configure menu.
Setting the Power Mode
This option sets the power mode.
3. From the Configure menu, select Power Mode.
Power Mode
X CAM
PSP
E D
The choices include CAM (Continuous Awake Mode) or PSP (Power Save Protocol).
PSP conserves battery power. CAM means the printer is continuously receiving and
transmitting data. This mode uses battery power quickly.
2-6 System Administrator's Guide
R
Press A to
Scrolls through the positions
from left to right
+
R
Press A to
Scrolls through the positions
from left to right
+
R
Press A to
Scrolls through the positions
from left to right
+
Press A to
Increments the current position
setting by 1
+
Press A to
Increments the current position
setting by 1
+
Press A to
Increments the current position
setting by 1