JLG E450AJ Operation And Safety Manual page 45

7. Telescope Control
Provides extension and retraction of the main
boom.
8. Lights (If Equipped)
This switch operates the accessory lights pack-
age if the machine is so equipped.
9.
Jib
Provides for raising and lowering of the jib.
10. Soft Touch/SkySense/SkyGuard Override Switch
For machines equipped with SkyGuard:
The SkyGuard override switch enables
functions cut out by the Skyguard sys-
tem to be operated again, allowing the
operator to resume use of machine func-
tions.
31215012
SECTION 3 - MACHINE CONTROLS AND INDICATORS
For machines equipped with both SkyGuard and Soft Touch:
The switch operates like the SkyGuard
override switch as described above.
The switch also enables the functions
cut out by the Soft Touch system to
operate again at creep speed, allowing the operator to move
the platform away from the obstacle that caused the shut-
down situation.
For machines equipped with both SkyGuard and SkySense:
The switch operates like the SkyGuard
override switch as described above.
The switch also enables the functions
cut out by the SkySense system to
operate again at creep speed, allowing the operator to move
the platform closer to the obstacle that caused the shut-
down situation if desired.
11.
Lower Boom Lift
Provides for raising and lowering of Lower
and Mid Boom.
3-9