SECTION 7 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
Table 7-8. Wheel Torque Chart
TORQUE SEQUENCE
1st Stage
40 ft. lbs.
(55 Nm)
4.
Wheel nuts should be torqued after first 50 hours of operation
and after each wheel removal. Check torque every 3 months or
150 hours of operation.
7.6
SUPPLEMENTAL INFORMATION ONLY APPLICABLE
TO CE MACHINES
The following information is provided in accordance with the
requirements of the European Machinery Directive 2006/42/EC.
The A-Weighted emission sound pressure level at the work plat-
form is less than 70dB (A).
The vibration total value to which the hand-arm system is sub-
jected does not exceed 2,5 m/s
value of weighted acceleration to which the whole body is sub-
jected does not exceed 0,5 m/s
7-16
2nd Stage
3rd Stage
100 ft. lbs.
170 ft. lbs.
(130 Nm)
(255 Nm)
2
. The highest root mean square
2
.
31215012