Section 4 - Machine Operation; Description; Limitations; Capacities - JLG E450AJ Operation And Safety Manual

Hide thumbs Also See for E450AJ:

Table of Contents

4.1

This machine is a mobile elevating work platform used to posi-

tion personnel, along with their necessary tools and materials at

work locations.

The primary operator control station is in the platform. From this

control station, the operator can drive and steer the machine in

both forward and reverse directions. The operator can raise or

lower the boom or swing the boom to the left or right. Standard

boom swing is 350 degree non-continuous. The machine has a

Ground Control Station which will override the Platform Control

Station. Ground Controls operate all functions except drive and

steer. Except for performing inspections and the Function Check,

the ground controls are to be used in an emergency to lower the

platform to the ground should the operator in the platform be

unable to do so.

31215012

SECTION 4. MACHINE OPERATION

4.2

The boom can be raised above horizontal with or without any

load in platform, if:

SECTION 4 - MACHINE OPERATION

OPERATING CHARACTERISTICS AND LIMITATIONS

Machine is positioned on a smooth, firm surface within the

limits of the maximum operating slope.

Load is within manufacturers rated design capacity.

All machine systems are functioning properly.

Machine is as originally equipped from JLG.

4-1

Table of Contents