Control Panel; Switching On / Turning Off - Vitrifrigo DRW Sereis Installation Use And Service Manual

7.1

Control panel

The panel has a capacitive touch screen keypad and an OLED display.
The lightest touch of your finger is enough to active a button. The display does not work with inanimate
objects, nails, gloves, etc. In order to keep the buttons efficient, clean the keypad with a damp cloth.
•
DRW180A
A
B
C
D
•
DRW70A
7.2

Switching on / Turning off

When the power supply is connected, the display switches on in Stand By mode and displays the
writing "VITRIFRIGO".
To switch the refrigerator on, press and hold button A for 2 seconds.
Once on, all the functions are enabled.
If more than one power source is available (VDC and VAC), power is selected automatically, with the AC
source taking precedence.
Pressing the A button again and the unit passes, alternatively, from the Stand By mode to On.
For best performance, switch the refrigerator on and wait for at least 6 hours before putting food
into it.
On/stand by
Mode
Down (down arrow)
Up (up arrow)
5 Indicazione set point cassetto
Fig. 7.2
Upper drawer reference
1
Upper setpoint indicator
2
Lower setpoint indicator
3
Lower drawer reference
4
Fig. 7.3
50