Anti-Mould Function - Vitrifrigo DRW Sereis Installation Use And Service Manual

7.7

Anti-mould function

When the unit is not in use, it is set up to prevent unpleasant smells and mould from forming inside the
compartment. Once the refrigerator is turned off and emptied, you must open the upper drawer and
remove the mechanism in the middle of the lid (see drawing).
EN
Push the two buttons and extract the mechanism until it "clicks", which means the mechanism has been
locked.
Carefully close the upper drawer so that it stays slightly open (about 1cm).
To reposition the drawer when in operation, open the drawer by the main handle and replace the
ventilation mechanism by pressing the two buttons highlighted by the arrows in the drawing.
The mechanism locks at the end of its travel range and the refrigerator is ready to return to normal
operation.
53