Fixing The Cell - Vitrifrigo DRW Sereis Installation Use And Service Manual

•
DRW180A

5.3.3 Fixing the cell

After having introduced the refrigerator into its compartment in the definitive position, make the holes in
the cell in the positions shown in the diagrams. To access all the points described, you will need to
remove both drawers (paragraph 8.2) and remove the plugs from their seats.
Drill with a metal drill bit, diameter 3.5mm. It is better to use 4.5x45 non-countersunk, chipboard screws.
Once installed, cover the bushings with the plugs provided.
•
DRW70A
Fig. 5.9
Fig. 5.10
45
EN