When installing the refrigerator or the refrigerator system on board a caravan, camper, motor home, etc.,
you must create the recess compartment on the vehicle with air ducts directly to the outside, equipped
with suitable grilles* with openings no greater than 5mm on each side, in the position and with the
dimensions shown in fig. 5.4.
5.2
Types of recess
For the whole series is possible to install the cabinet in the two ways below:
•
Total recess (door inside - door flush with the front side of the fixing profile): prepare the profile
and the base profile, supplied as a kit, as shown in the diagram using the screws already installed
(see single arrows).
•
Partial recess (door outside - door closes proud of the front side of the fixing profile): prepare the
profile and the base profile, supplied as a kit, by making it slide in the direction of the double
arrows.
Fig. 5.5
Fig. 5.6
43
EN