Replacing The Led Light Profile From The Upper Drawer - Vitrifrigo DRW Sereis Installation Use And Service Manual

8.3

Replacing the LED light profile from the upper drawer

IMPORTANT: Before replacing the light, make sure that the refrigerator is not connected to any
electrical supply. If connected, unplug the appliance from the electrical supply. Replacing the
LED light must be done by a suitably qualified person who is able to adopt all the appropriate
safety measures.
The DRW series refrigerators have LED lights magnetically controlled by opening/closing the drawers.
In the module with two drawers, you can replace the upper drawer's light. To replace the LED light
profile:
1. Remove, perpendicular to the base, the protective cover, being careful not to damage the
fixing pins.
Disconnect the light's power cables.
2.
3. Replace the LED light profile.
4. Connect the power source.
5. Replace the cover.
55
EN