Installation; Appliance Recess - Vitrifrigo DRW Sereis Installation Use And Service Manual

5 INSTALLATION

When opening the packaging, after having received the appliance, check that it is not damaged. Any
transportation damage must be reported promptly to the reseller and, in any case, within 24 hours of
taking delivery of the appliance.
Handle the product with the utmost care and attention.
When positioning the refrigerant unit (in refrigerator models with a remote refrigerant system), take
precautions to avoid obstructions and breaking the connection pipes.
Always position the refrigerator and the remote refrigerant unit (in the versions with such a solution) on
a horizontal surface that can support the weight of the appliance and its eventual contents.
Always position the remote refrigerant unit (in the versions with such a solution) to ensure an adequate
ventilation and away from heat sources.
Once installation has been completed, check that the refrigerator is not resting on a power cable.
If the power cable is damaged, it must be replaced immediately by someone from the technical service
centre or by someone suitably qualified, in order to avoid any risk.
Place the refrigerator away from heat sources, making sure that there is sufficient ventilation, as can be
seen in the following installation examples.
Once the refrigerator has been positioned, wait at least one hour before switching it on.
5.1

Appliance recess

•
DRW70A
Fig. 5.1
40